EN
HU
RO

Promotional flags

Promotional flags
details
 

National flags

National flags
details
 

Poles and accesories

Poles and accesories
details
 

Fiberglass Poles - "High class flagpoles"

Description

The fiberglass flagpole is manufactured in white-dyed through light-resistant glass fiber reinforced polyester. They have a conical shape and they are flexible; even if they sag during a strong storm, this kind of masts will always come back to the initial perfect verticaly position. Meanwhile, the poles made from other materials suffer permanents deformations.

Fiber glass poles are strong lightweight, easy to handle and maintain. It can be very easy cleaned with soapy water. Scratches are nearly visible because the throught color of the pole.

Guaranty: 10 years.

 

FLAGPOLE HEIGHT (m)

WEIGHT (kg)

DIAMETER BASE (mm)

DIAMETER TOP (mm)

8

13

115

50

10

26

140

65

12

36

145

65

 

Other sizes, from 2, up to 18 meters are available.

 
 
ROTATING BANNER ARM FLAGPOLE

ROTATING BANNER ARM FLAGPOLE

Description:

The pole is designed for the flag to be seen from any position, not only when the wind blows. The pole with the rotating arm moves in the wind direction and that encreases the life time of the flag. The flag can be replaced by descending the mast with the joint system at the base.

Accesories:

The poles are completely equipped with the fixing foundation for concrete, rotating arm, top of the mast and counterweight.

You don’t know how the pole is being installed? We’ll explain it to you!

For this type of flagpole, the tilt foot is used for fixing foundation on the pole.

1. Dig a hole of a suitable size and depth (see specifications below), and feel the hole with good cement.
2. Press the anchor bolts into the concrete. To facilitate later adjustments of the flagpole, there must be a gap of approx.30 mm between the tilt plate and the concrete
3. Level the tilt plate and support it with a board to prevent it sinking into the concrete. Remember to position the tilt plate to allow enough space to mount the flagpole.
4. Once the concrete has been set (3-7 days), connect the upper bracket on the flagpole to the tilt plate using the cranked cotter. Erect the flagpole and fasten it with nuts.
5. Adjust the vertical position of the flagpole with the 3 nuts on each anchor bolt. Remember to tighten all 12 nuts once the flagpole is vertical.

POLE FOUNDATION
Height (m) Depth (cm) Width (cm)
6 60 30
7 60 30
8 70 40